Product Description

Polarstar Airsoft F1 V2 Player Package

•  TRIGGER BOARD Included
•  FCU (Fire control Board) Included
•  Wire Harness Included

The F1™ is a high performance, universal HPA (High Pressure Air) drop-in cylinder designed to fit virtually any AEG gearbox which incorporates a center-line nozzle. It replaces the original gearbox components with a programmable pneumatic system allowing for higher performance, greater reliability and complete adjustability. This allows the F1™ to fill any role ranging from CQB to sniper with no additional components needed.

The F1 has only one moving part (the nozzle) and just two dynamic seals (o-rings which move and experience fictions). This translates into extreme reliability and makes maintaining the F1 easy. To further simplify maintenance, the F1 requires no tools for disassemble. 

In Short, the F1 is the most compact, simplistic, versatile and air efficient HPA conversion kit to date. 

Specs: Recorded with stock VFC M4 (6.05x375mm barrel) 

Velocity: 500FPS w/ .20g @ 120psi. 

The F1 allows for easy velocity adjustment. Using a standard M4 as an example, velocity can be adjusted from below 100fps and up to approximately 500fps with a .20g BB. Longer barrels will increase the maximum FPS while shorter barrels will decrease it. 

ROF: 30RPS+ 
The maximum cyclic rate of the F1 is affected by several factors, however, 30 rounds per second is a conservative number. Most configurations will exceed this easily. 

Air Efficiency: 1200 shots from 13/3000 @ 1.5J (80PSI w/ .28g) 
The F1 is extrememly efficient. The patent pending design of the F1 allows for the most direct air path to the nozzle with minimum dead volume resulting in better flow, faster response and less air used per shot. Using a stock VFC M4 as a test platform, the F1 was able to fire approximately 1200 rounds for a 13ci/3000psi cylinder before pressure dropped below regulated output.